مشخصات فنی اسیلوسکوپ دیجیتال DPO6082B هانتک
Oscilloscope function |
| Acquisition |
Real-time sample rate |
1 GSa/s（single channel） 500 MSa/s（two channels） |
| Note：digital channel 12，34 open at the same time,it is considered as one channel |
| Peak detection |
Analog channel 4ns |
| Note：digital channels don’t support |
| Average mode |
Analog channel |
|
All channels reach N time samples at the same time，N can be selected from
2、4、8、16、32、 64、128、256、512 and 1024.
|
| Note：digital channels don’t support |
| High resolution |
Up to 12bit |
| Note：digital channels don’t support |
| Minimum test pulse width |
8ns |
| Memory depth |
Single channel 64M |
| Two channels 32M |
| Input |
Channel quantity |
4 analog channels |
| Note：data channels can’t be opened |
| 3 analog channels |
| Note：digital channel LA1/LA2/LA3/LA4/LA1LA2/LA3LA4 |
| 4 analog channels |
| Note：digital channels infinitize |
| 1 analog channel |
| Note：digital channels infinitize |
| 0 analog channel |
| Note：digital channels infinitize |
| Input coupling |
DC、AC or GND |
| Note：digital channels don’t support |
| Input impedance，DC coupling |
Analog channel |
| 25pF±3 pF，1MΩ±2% |
| Digital channel |
| (300KΩ±2%) ，(8 pF±3 pF) |
| Supported probe attenuation factor |
Analog channel 1X、10X、100X、1000X |
| Voltage classes |
300V CAT II |
| Maximum input voltage |
Analog channel 300VRMS (10X) |
| Digital channel -25V~25V |
| Horizontal |
Waveform interpolation |
(sin x)/x |
| Maximum record length |
Single channel maximum 64M |
| Two channels maximum32M |
| three/four channels maximum 16M |
| Horizontal scale range |
DSO6084 DSO6104 |
| 2ns/div~100s/div 1， 2， 5 step by step |
| Time base mode |
Y-T、X-Y、Roll |
| X-Y number |
Channel 1,2 1 XY channel、channel3 4 1 XY channel |
| Zero offset |
±0.5 div× minimum time base gear |
| Sample Rate and |
±25ppm |
| Delay Time Accuracy |
| Clock drifting |
≤±5 ppm/year |
| Delta Time Measurement |
single，“acquisition”mode |
| Accuracy |
| (Full Bandwidth) |
±（1 sample interval+100ppm×reading+0.6ns） |
| ＞16 times averages |
| ±（1 sample interval+100ppm×reading+0.4ns） |
| Sample interval=sec/div÷200 |
| Vertical |
Bandwidth（-3db） |
DPO6082 |
DPO6102 |
DPO6202 |
| 80MHz |
100MHz |
200MHz |
| Vertical resolution |
Analog channel 8bit |
| Digital channel 1bit |
| Vertical scale range |
nput BNC position is 500μV/div~10V/div |
| Position range |
500μV/div to 120mV/div，±1V |
| 122mV/div to 1.2V/div，±10V |
| 1.22V/div to 10V/div，±50V |
| Optional analog bandwidth limitation |
Typical 20MHz |
| Bass response（-3db） |
In BNC position is≤10Hz |
| Rising time in BNC position，typical |
DPO6082 |
DPO6102 |
DPO6202 |
| ≤4.4ns |
≤3.5ns |
≤1.8ns |
| Vertical gain accuracy |
In “normal” or “average” acquisition mode，the accuracy of 10V/div to 10mV/div is ±3% |
| In “normal” or “average” acquisition mode，the accuracy of 5mV/div to 500uV/div is ±4%. |
| DC offset accuracy |
±0.1 div±2 mV±1% offset value |
| The isolation of channels |
DC maximum bandwidth：>40 dB |
| Note: Bandwidth reduced to 6MHz when using a 1X probe |
| Trigger |
Trigger level range |
±5 divisions from the center of the screen |
| Trigger mode |
auto、general、single |
| Level |
CH1~CH2 |
±4 divisions from the center of the screen |
| Holdoff range |
8ns~10s |
| Trigger level accuracy |
CH1~CH2 |
0.2 div×volts/div within ±4 divisions from the center of the screen |
| Edge trigger |
Slope |
Rising edge，falling edge，rising or falling edge |
| Signal source |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Pulse width trigger |
Polarity |
Positive polarity，negative polarity |
| Condition(When) |
<，>， !=， = |
| Signal source |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Pulse width range |
8ns ~ 10s |
| Video trigger |
Signal standard |
NTSC， PAL |
| Signal source |
CH1~CH2 |
| Synchronization |
Scanning line、line number、odd field、even field、all field |
| Slope trigger |
Slope |
rise，fal |
| condition(When) |
<，>， !=， = |
| Signal source |
CH1 ~ CH2 |
| Time range |
8ns ~ 10s |
| Overtime trigger |
Signal source |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Polarity |
Positive polarity，negative polarity |
| Time range |
8ns ~ 10s |
| Window trigger |
Signal source |
CH1~CH2LA1~LA4 |
| Pattern trigger |
Pattern |
0:low level；1:high level；X:ignore； |
| Level（signal source） |
CH1~CH2 |
| Interval trigger |
Slope |
rise，fall |
| condition(When) |
<，>， !=， = |
| Signal source |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Time rangeTime range |
8ns ~ 10s |
| Delay trigger |
Edge type |
Rising edge，falling edge |
| Signal source |
CH1~CH2 |
| condition(When) |
<，>， !=， = |
| Time range |
8ns ~ 10s |
| Set up hold trigger |
Edge type |
Rising edge，falling edge |
| Signal source |
CH1~CH2 |
| condition(When) |
<，>， !=， = |
| Time range |
8ns ~ 10s |
| Runt trigger |
Polarity |
Positive polarity，negative polarity |
| Condition(When) |
<，>， !=， = |
| Signal source |
CH1~CH2 |
| Time range |
8ns ~ 10s |
| UART trigger |
condition(When) |
start、stop、data、odd-even check、reception error |
| Signal source(RX/TX) |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Data format |
Hex（hexadecimal） |
| Data length |
1 byte |
| Data bit width |
5 bit， 6 bit， 7 bit， 8 bit |
| Odd-even check |
none、odd、even |
| Free level |
high、low |
| Baud rate (optional) |
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/11520
0/230400/380400/460400 bit/s
|
| Baud rate(user-defined) |
300bit/s~334000bit/s |
| LIN trigger |
condition(When) |
Interval field、synchronization field、ID field、synchronization error、identifier、IDand data |
| Signal source |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Data format |
Hex（hexadecimal） |
| Baud rate(optional) |
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/11520
0/230400/380400/460400 bit/s
|
| Baud rate(user-defined) |
300bit/s~334000bit/s |
| CAN trigger |
condition(When) |
Start bit、remote frame ID、data frame ID、frame ID、remote frame data、data frame data、wrong frame、all errors、answer error、overload frame |
| Signal source |
CH1~CH2 |
| Data format |
Hex（hexadecimal） |
| Baud rate(optional) |
10000， 20000， 33300， 500000， 62500， 83300， 100000， 125000
， 250000， 500000， 800000， 1000000
|
| Baud rate(user-defined) |
5kbit/s~1Mbit/s |
| SPI trigger |
Signal source |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Data format |
Hex（hexadecimal） |
| Data bit width |
4， 8， 16， 24， 32 |
| IIC trigger |
Signal source (SDA/SCL) |
CH1~CH2， |
| D1.0~D1.3， |
| D2.0~D2.3， |
| D3.0~D3.3， |
| D4.0~D4.3 |
| Data format |
Hex（hexadecimal） |
| Data index |
0~7 |
| opportunity(condition) |
Start bit、stop bit、no response、address、data、restart |
| Measurement |
cursor |
Voltage difference between cursors △V |
| Time difference between cursors △T |
| Reciprocal of △T，in Hertz（1/△T） |
| Auto measurement |
frequency、period、mean、peak-to-peak、RMS、minimum、mixmum、rising time、falling time、+ width、- width、base、top、middle、amplitude、overshoot、preshoot、rising edge phase difference、falling edge phase difference、+ duty、- duty、period mean、PRMS、FOVshoot、ROVshoot、BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF |
| DVM |
Data source |
CH1，CH2 |
| Measurement type |
DC effective value |
| AC effective value |
| DC |
| Frequency meter |
hardware 6 bits frequency meter |
| Arbitrary waveform generator |
| Arbitrary waveform generator(for oscilloscopes with signal source channels) |
Channel number |
2 channels |
| Sample rate |
200MSa/s |
| Vertical resolution |
12 bits |
| Maximum frequency |
25 MHz |
| Standard waveforms |
sin、square、pulse、triangular，noise、DC |
| Sinc、index、semi-distortion、lorentz，dual tone multiple frequency，gauss，ECG |
| Arbitrary waveform |
Arb1，Arb2，Arb3，Arb4 |
| Sin |
Frequency range |
0.1Hz~25MHz |
| square/pulse |
Frequency range |
0.1Hz~10MHz |
| triangular wave |
Frequency range |
0.1Hz~1MHz |
| Sampling wave |
Frequency range |
0.1Hz~1MHz |
| Index |
Frequency range |
0.1Hz~5MHz |
| Semi-distortion |
Frequency range |
0.1Hz~1MHz |
| lorentz |
Frequency range |
0.1Hz~1MHz |
| Dual tone multiple frequency |
Frequency range |
0.1Hz~1MHz |
| Gauss |
Frequency range |
0.1Hz~1MHz |
| ECG |
Frequency range |
0.1Hz~1MHz |
| Arbitrary wave |
Frequency range |
0.1 Hz to 10 MHz |
| Waveform length |
8KSa |
| Frequency |
accuracy |
100 ppm（<10 kHz） 50 ppm（>10 kHz） |
| resolution |
0.1 Hz or 4 bits，take the greater one |
| Amplitude |
Output range |
10mV~7Vp-p(high impedance) |
| 5mV~3.5Vp-p(50Ω) |
| DC offset |
range |
±3.5 V，high impedance |
| ±1.75 V，50 Ω |
| resolution |
100 μV or 3 bits，take the greater one |
| accuracy |
2%（1 kHz） |
| Output impedance |
50 Ω |
| Logic analyzer |
| Logic analyzer |
Input impedance,DC coupling |
Digital channel |
| (300KΩ±2%) ，(8 pF±3 pF) |
| Threshold value |
4 channels in 1 group adjustable threshold value |
| Threshold option |
TTL（1.4 V） |
| 5.0 V CMOS（+2.5 V） |
| 3.3 V CMOS（+1.65 V） |
| 2.5 V CMOS（+1.25 V） |
| 1.8 V CMOS（+0.9 V） |
| ECL（-1.3 V） |
| PECL（+3.7 V） |
| LVDS（+1.2 V） |
| 0V |
| User-defined |
| Threshold range |
±7.0V，10mV step by step |
| Threshold accuracy |
±(100mV+3% threshold setting) |
| Dynamic range |
±5.0V+ threshold |
| Minimum voltage swing |
500 mVpp |
| Vertical resolution |
1 bit |
| General specifications |
| Display |
Display type |
7"TFT diagonal liquid crystal |
| Display resolution |
800（horizontal）*480（vertical）pixels |
| Display colour |
16 million colours（24 bits true colour） |
| Persistence time |
minimum、1 s、5 s、10 s、30S、infinite |
| Display type |
dot、vector |
| Display mode |
Color temperature，gray scale |
| Display brightness |
adjustable |
| Grid type |
adjustable |
| Grid brightness |
adjustable |
| Interface |
Standard interface |
USB Host，USB Device，LAN， EDU signal WIFI |
| Aux（trigger output/PassFail ）--only EDU with this interface |
| Optional interface |
PassFail |
| UART |
| HDMI |
| General specifications |
Probe compensator output |
| Output voltage ，typical |
about 2Vpp input≥1MΩ load |
| frequency、typical |
1kHz |
| Power supply |
100-120VACRMS(±10%)，45Hz to 440Hz，CATⅡ |
| 120-240VACRMS(±10%)，45Hz to 66Hz，CATⅡ |
| Power consumption |
<30W |
| Fuse |
T，3.15A，250V，5x20mm |
| Operating temperature |
0~50 °C (32~122 °F) |
| Storage temperature |
-40~+71 °C (-40~159.8 °F) |
| Humidity |
≤+104℉(≤+40°C): ≤90% relative humidity |
| 106℉~122℉ (+41°C ~50°C): ≤60% relative humidity |
| Cooling method |
convection |
| Altitude |
Operating and nonoperating |
3，000m（10，000 feet） |
| Mechanical shock |
Random vibration |
0.31 g RMS from 50Hz to 500Hz， |
| 10 minutes on each axis |
| Nonoperating |
2.46g RMS from 5Hz to 500Hz， |
| 10 minutes on each axis |
| Operating |
50g，11ms，half-sine wave |
| Mechanical |
Size |
318 x 140 x 150mm(length x width x height) |
| Weight |
2900g |
گارانتی معتبر
مشاوره تخصصی
ضمانت اصالت کالا
پشتیبانی آنلاین
برای ثبت نظر، لازم است ابتدا وارد حساب کاربری خود شوید. اگر این محصول را قبلا از مولتیکو خریده باشید، نظر شما به عنوان مالک محصول ثبت خواهد شد.